JASTI Co., Ltd.

JASTI Co., Ltd. You can make it with JASTI. JASTI will cooperate with your every demand for the human safety.

相关法规/技术情报

相关法规

PageTop
PageTop
PageTop
PageTop
PageTop
PageTop
PageTop
PageTop
PageTop
PageTop
PageTop
PageTop
PageTop
PageTop

技术情报

JASTI主动处理RoHS2违禁物质。

2015年6月,欧盟委员会发布了一个命名为(EU)2015/863的新指令来修改了 RoHS 2 (Directive 2011/65/EU)的附件二以增加下面四种邻苯二甲酸盐:

  • ・ Bis(2-Ethylhexyl) phthalate (DEHP)
  • ・ Benzyl butyl phthalate (BBP)
  • ・ Dibutyl phthalate (DBP)
  • ・ Diisobutyl phthalate (DIBP)

上述这四种邻苯二甲酸化合物,在日本被广泛用作聚氯乙烯增塑剂,而欧盟的新RoHS2法规将在2019年后施行。
JASTI在过去曾使用DINP材料作为聚氯乙烯的增塑剂,虽然DINP材料目前并不在法规所列的违禁材料列表中,但是我们考虑到DINP材料可能会在将来被添加进法规所列违禁材料中去,出于这个原因,我们弃用了DINP,将聚氯乙烯增塑剂的材料改为没有任何酸性气体产生的材料。这则讯息在JASTI 2017版的产品手册中有被提到。

目前,JASTI使用的聚氯乙烯增塑剂材料是没有任何酸性气体产生的环保材料,并且产品的重量和硬度仍然可以达到法规图纸的要求值。
如您想了解关于针对假人的RoHS2相关细节,请随时联络我们。

PageTop

Design and performance specification for the WorldSID 50th percentile male side impact dummy-Part 5:Dummy design updated

ISO 15830 WSID 50th第1,2,3,4部分,第二版在2013年的5月由ISO TC22/SC36/WG5发布。该工作组在三年后的2016年2月又有了更新,我们称之为第5部分。

请参考附件技术情报中的细节。部分重量被重新评估并更改。手臂及脚踝的可移动区域也被更改。骨盆内部模型也按照更新后的规格被修改。

另一方面,市场上对生物仿真度的要求出现了E,F,G等一些非标版本。JASTI在2014年11月6日圣地亚哥的ISO/TC22/SC12/WG5工作组会议上就提出该假人的头部及颈部是可以按照原始的标准来制造的。因此,基于我们研发结果的标准从未被修改过。

PageTop
PageTop

JTC-240401 Nodding Block

Hardness requirement on the drawing: Durometer range from 80 to 90.
JASTI Nodding Blocks: Durometer hardness of 80, 82, 85, 87, 90 (5 models) are available
Features
  1. Maximum Rotation angle, moment, and time that required for neck test are adjustable.
  2. The test can be done more efficiently by adjusting the duromenter hardness of nodding block when necessary.
PageTop

JTC-240402 Rubber Parts

Features

From rubber compounding to manufacturing of rubber, JASTI ensures the characteristics of neck, nodding block, lumbar spine, knee insert, ankle bumper meet the requirements We manufacturer customized products to satisfied each customer’s need.

PageTop

JTC-240403 Lumbar Spine

Hardness requirement on the drawing: Durometer range from 75 to 85 (Hybrid-III 50th)
JTC-240403 Lumbar Spine Hardness requirement on the drawing: Durometer range from 75 to 85 (Hybrid-III 50th) JASTI lumbar spine: Durometer range from 80 +/- 1 (Under our quality control)
Specifications

The hardness of lumbar spine is an important factor which affects the movement of the upper part of dummy and the impact value on ribs. For the reason, we have been testing lumbar spine (for Hybrid-III 50th, Hybrid-III 5F, 6-year-old, 3-year-old dummies…etc) on a Torso bending test equipment to observe and record the bending characteristics of upper torso.
As the lumbar spine of Hybrid-III 50th is in a curve shape, it is necessary for controlling the hardness of the rubber in that we control the performances.

PageTop

JTC-240404 Pelvis

Through closely control of skin and fillers ratio during production, we provide and ensure quality of Hip Joint that meets the requirements of characteristics tests. Through our long experiences in researches and their results, we are able to provide Hip Joints that meet each customer’s specific requirements.

PageTop

JTC-240405 Knee Flesh Insert

The requirements from the drawing: Durometer 40 to 50°(Hybrid-III 50th)
JASTI Knee Flesh Insert: Durometer soft; 42°, Normal 45°, Hard: 47°(3 models available)
Features

Knee Flesh Inserts can be used for brand new or worn Knee Flesh by adjusting the hardness of the rubber.

PageTop

FEDERAL REGISTER

PageTop
PageTop
PageTop
PageTop
PageTop
PageTop